FlowmetersDifferential Press...
Model comparison
Compare only the points that determine the choice: function or construction, applicable medium, operating range, body material, and connection or nominal size. Open the model page to confirm the full specification.
| Model | Key selection point | Medium | Operating range | Body material | Connection / size |
|---|---|---|---|---|---|
| ODF-100 | Orifice Flowmeter for Steam | Saturated steam | 1.0MPa 220°C | — | Wafer connection JIS10K; Nominal size 15A ~ 200A, 1.0MPa |
| UFM-100 | Clamp-on Ultrasonic Flowmeter | — | — | — | 10A~80A (φ16.5~φ92) |
| VDF-100 | Venturi and Orifice Flow Meter | — | — | — | JIS 10K Flange; Venturi (Horizontal) / Orifice (Vertical), 50A-200A JIS 10K |
Process scope
The local Yoshitake flow-meter category includes a differential-pressure flow meter for saturated steam and a clamp-on ultrasonic meter for pipe-mounted liquid-flow measurement. These technologies have different installation, medium, and signal requirements and should not be selected by nominal size alone.
Project-specific checks
- Identify the medium and measurement objective: saturated steam versus liquid flow.
- Confirm line size, material, wall condition, available straight run, velocity, pressure, and temperature.
- Specify accuracy, output or communication interface, power, display, and environmental protection needs.
- Review installation access, insulation removal, calibration method, and verification procedure.
Final verification
This guide groups local Yoshitake catalogue pages for preliminary engineering review. The model-specific Yoshitake documentation, sizing calculation, materials confirmation, and applicable site requirements control the final order and installation decision.
Available models
Open a model page for specifications, connection options and technical documents.
