Bürkert Type 6027 (Model 20072634) is a direct-acting 2/2-way plunger solenoid valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. This specific model features a brass body, FKM seals, a G 1/2 internal thread, and an 8 mm orifice. It operates on 230-240V AC and includes energy-saving Kick and Drop coil technology. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valve satisfies protection class IP65.

• Direct-acting, powerful valve
• Vibration-proof, bolted coil system
• Energy-saving double coil technology with kick and drop variant

General Technical Data

Product properties
Material
Seal	FKM
Body	Brass
Coil	Epoxy
Orifice	8.0 mm
Circuit function	A (Normally closed)
Thermal insulation class of solenoid coil	Epoxy coil class H
Performance data
Duty cycle	100% continuous operation
Switching time AC	Opening: 10...30 ms, Closing: 50...80 ms
Electrical data
Operating voltage	230-240 V AC, 50/60 Hz
Voltage tolerance	±10%
Medium data
Operating medium	Vacuum, neutral gases and liquids (e.g. compressed air, water, hydraulic oil, petrol) and slightly aggressive medium, hot liquids and steam
Medium temperature	-10 °C...+140 °C
Product connections
Electrical connection	Plug contacts according to DIN EN 175 301-803 form A
Port connection	G 1/2
Environment and installation
Installation position	Any, preferably with actuator on top
Ambient temperature	Max. +55 °C (Max. +70 °C with Kick and Drop coil)

Note on Temperatures

The temperature specifications correspond to the specified switchable differential pressures. Higher temperatures are possible on request, depending on the differential pressure, duty cycle and number of switching operations.

Circuit Functions

Symbol	Description
	Circuit function A (CF A) 2/2-way solenoid valve Direct-acting Normally closed

Materials

Standard Variant (Elastomer seal up to 30 bar)

No.	Element	Material
1	Nut	DIN 176 thick-film passivated or stainless steel
2	Coil	Epoxy
3	Stopper	Stainless steel 1.4113/434
4	Shading ring	Copper (brass body)
5	Spring	Stainless steel 1.4310/301
6	Plunger	Stainless steel 1.4113/434
7	Guide tube	Stainless steel 1.4303/305/308
8	Nipple	Brass
9	Seal	FKM
10	Seat seal	FKM
11	Housing	Brass

Dimensions

Standard Threaded Variant

INFO

Note: Dimensions in mm

Variant	A [mm]	B [mm]	C [mm]	E [mm]	F [mm]	H [mm]	J [mm]	K [mm]	L [mm]
G 1/2	14	29.5	14	110	18	M4	5	55	55

Coil size	M [mm]	N [mm]	O [mm]
K	42	27	55.5

Installation Safety

Risk of injury from high pressure in the system. Before loosening lines or valves, switch off the pressure and vent the lines. Ensure that the system cannot be activated unintentionally.