Bürkert 20074754 Type 7011 is a direct-acting and compact small plunger valve up to DN 2.4. To increase pressure resistance and leak-tightness, the stopper and the core guide tube are welded together. This specific model features a brass body, FKM seals, an M5 internal thread connection, and operates on 24 V DC. It is designed for circuit function A (normally closed) and is suitable for neutral gaseous and liquid media.

The valve utilizes a slipped-over coil system and allows for simple and fast mounting. In combination with a suitable plug conforming to DIN EN 175301-803 shape B, the valve satisfies the IP65 degree of protection.

General Technical Data

Feature	Specification
Orifice	DN 1.2
Body material	Brass
Seal material	FKM (Fluor rubber)
Operating voltage	24 V DC
Nominal pressure	0 to 16 bar
Medium temperature	-10 °C to +100 °C
Ambient temperature	-10 °C to +75 °C
Viscosity	Max. 21 mm²/s
Degree of protection	IP65 (with suitable connector)

Circuit Function

Circuit function A (CF A): 2/2-way solenoid valve, direct-acting, normally closed.

Material Specifications

No.	Element	Material
1	Nut	DIN 176 Surface finish thick film passivated KOSA0101
2	Stopper	Stainless steel 1.4113/434
3	Core guide tube	Stainless steel 1.4303 ST/305L
4	Shading ring	Copper (optional silver)
5	Core	Stainless steel 1.4113/434
6	Spring	Stainless steel 1.4310/301
7	Seal	FKM
8	Valve body	Brass
9	O-ring	FKM
11	Coil	Epoxy

Dimensions

Threaded Variant

Port connection	A [mm]	B [mm]	C [mm]	D [mm]
M5	5	20	10	10

Safety Instructions

Risk of injury from high pressure in the system or device Before working on the system or device, switch off the pressure and ventilate and empty the lines.

Risk of injury from electric shock Before working on the system or device, switch off the power supply and secure against reactivation. Observe the applicable accident prevention and safety regulations for electrical devices.