BURKERT 20110398 (Type 8652 AirLINE) is a 12-slot pneumatic valve island configured for process automation integration. Built with an anodised aluminium AirLINE Quick adapter plate, this specific unit integrates 10 dual 3/2-way normally closed solenoid valve modules (circuit function C) on valve positions 1 through 10, alongside 2 blind plates on positions 11 and 12. Digital communication is managed by a modular ME43 fieldbus gateway supporting multi-protocol Industrial Ethernet, including PROFINET IO, EtherNet/IP, Modbus TCP, EtherCAT, and CC-Link IE Field Basic through dual RJ45 ports.

The assembly uses 11 mm wide Type 6534 pilot-operated solenoid valves actuated by internal Type 6164 pilot stages. Supply air is delivered via brass D10 push-in fittings with supplementary D6 and D10 connections on the left end module, while pneumatic working connections use brass D6 push-in ports. Operating at 24 V DC with continuous duty (100% ED), power per valve drops from an initial 0.7 W (29 mA) to an energy-saving 0.175 W (10 mA) after current reduction.

Specific Configuration & Port Allocation

Article 20110398 provides 12 physical valve slots factory-equipped according to the table below:

Valve Position	Component Type	Circuit Function / Details
Position 1	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 2	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 3	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 4	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 5	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 6	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 7	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 8	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 9	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 10	Type 6534 Solenoid Valve Module	2x 3/2-way CF-C (Normally closed, servo-controlled)
Position 11	Dummy Valve Plate	Blind plate without active pneumatic valve
Position 12	Dummy Valve Plate	Blind plate without active pneumatic valve

Each dual 3/2-way CF-C valve module operates two independent pneumatic outputs from a single 11 mm slice, allowing up to 20 pneumatic working circuits across the 10 active positions.

AirLINE Quick Installation & Dimensions

AirLINE Quick allows direct flush mechanical mounting to the floor or wall of a control cabinet. All pneumatic supply and working lines connect through push-in bulkheads on the outer face of the adapter plate, eliminating internal cabinet pneumatic piping and reducing enclosure volume.

Specification Variant	Dim A [mm]	Dim B [mm]	Fastening C	Fastening Pitch m	Fastening Index n
4-fold	66	—	4 x M5	3	1
8-fold	35	111	8 x M5	7	2
12-fold (20110398)	77	154	10 x M5	11	3

Mounting Clearances

When mounted inside closed control cabinets using the AirLINE Quick adapter plate, the terminal attains an IP65 rating on the pneumatic connection face. Unmounted standalone units have an IP20 rating.

Electrical & Industrial Ethernet Connections

Electrical power and communication are separated into dedicated terminals on the interface module:

• Communication and Display Power: 5-pin spring-loaded terminal block (wire cross-section ≤ 1.5 mm²).
• Pneumatic Valve Supply: 2-pin spring-loaded terminal block supplying auxiliary 24 V DC.

5-Pin Spring Terminal	Wire Color	Assignment
Pin 1	Red	+24 V DC (electronics power)
Pin 2	White	CAN_H (internal büS connection)
Pin 3	Green	Shielding
Pin 4	Blue	CAN_L (internal büS connection)
Pin 5	Black	0 V DC (GND)

2-Pin Spring Terminal	Terminal Clip	Wire Color	Assignment
AUX 24 V	1	Red	AUX +24 V DC (valve power)
GND	2	Black	0 V DC (valve GND)

Industrial Ethernet connections are established via two shielded RJ45 ports (X1 and X2), enabling line and ring topologies across PROFINET IO, EtherNet/IP, Modbus TCP, EtherCAT, and CC-Link IE Field Basic.

RJ45 Pin	Industrial Ethernet Signal Allocation
1	TX+
2	TX-
3	RX+
4	Not connected (N.C.)
5	Not connected (N.C.)
6	RX-
7	Not connected (N.C.)
8	Not connected (N.C.)

Pneumatic Technical Data

Parameter	Value / Range
Operating Medium	Oil-free or lubricated compressed dry air, neutral gases
Compressed Air Quality	ISO 8573-1:2010, Class 7.4.4 (5 µm filtration recommended)
Working Pressure Range	Vac to 10 bar (-1.0 to 10.0 bar)
Control Pressure Range	3 to 10 bar (internal auxiliary pilot air)
Flow Rate QNn (Air)	270 l/min per 2x 3/2-way CF-C valve (at +20 °C, 6 bar inlet, 1 bar delta P)
Valve Width per Station	11 mm
Valve Switching Times	Opening: 15 ms; Closing: 15 ms (measured per ISO 12238)
Operating Mode	Continuous operation (100% duty cycle)
Operating Temperature	-10 °C to +55 °C (medium and ambient)
Storage Temperature	-20 °C to +60 °C

Configuration & Diagnostics

Type 8652 communicates with the PC-based Bürkert Communicator software (Type 8920) via the USB büS interface set (article 772426) for parameter assignment, diagnosis, cyclic value mapping, and firmware updates.

Spare Parts & Compatible Accessories

Item Description	Article Number
Replacement Valve Type 6534: 2x 3/2-way CF-C, 24 V DC (incl. screws)	301374 (Spare kit REF 296031)
Replacement Blind Plate (dummy valve slice)	335779 (Spare kit REF 327614)
5-Pin Spring-Loaded Terminal Block (Communication / Display supply)	920180
2-Pin Spring-Loaded Terminal Block (Pneumatic valve supply)	920442
Replacement Fieldbus Gateway Type ME43 — Industrial Ethernet	301799
AirLINE Quick M5x10 A2 DIN 6912 Base Screws (10 pcs)	308661
AirLINE Quick Height Adapter for 12-fold terminal	754961
AirLINE Quick External Retaining Plate for 12-fold terminal	60005567
USB büS Interface Set 1 (Type 8923) for Bürkert Communicator software	772426