BURKERT 20135919 (Type 6013) is a direct-acting 2/2-way plunger solenoid valve designed for compact and reliable fluid control up to DN 6.0. The stopper and the core guide tube are welded together to increase pressure resistance and leak-tightness. This specific model features a brass body, FKM seal, G1/4 internal thread, and operates at 24 V DC with a pressure range of 0 to 6 bar. It is suitable for technical vacuum, neutral gases, and liquids.

General Technical Data

Product properties	Description
Dimensions	See Dimensions section
Seal	FKM
Body	Brass
Coil	Polyamide, epoxy
Orifice	DN 4.0 mm
Circuit function	A (Normally closed)
Thermal insulation class	Polyamide coil class B, Epoxy coil class H
Duty cycle	100% continuous operation
Operating voltage	24 V DC
Voltage tolerance	±10%
Operating medium	Technical vacuum, neutral gases and liquids (e.g. compressed air, water, hydraulic oil)
Medium temperature	-10 °C...+100 °C (PA coil), -10 °C...+120 °C (Epoxy coil)
Viscosity	Max. 21 mm²/s
Electrical connection	Plug contacts according to DIN EN 175 301 - 803 form A
Port connection	G 1/4
Degree of protection	IP65 with cable plug
Installation position	As required, preferably with actuator upright
Ambient temperature	Max. +55 °C

Circuit Functions

Symbol	Description
A	Circuit function A (CF A) 2/2-way solenoid valve Direct-acting Normally closed

Approvals and Conformities

North America (USA/Canada)

• UL Recognized: The valves are UL Recognized for the USA according to UL 429 (electrically operated valves).
• CSA: The valves are CSA approved for Canada according to CSA 139 (electrically operated valves).

Materials

No.	Element	Material
1	Stopper	Stainless steel 1.4105/430F
2	Shading ring	Cu (brass variant)
3	Spring	Stainless steel 1.4310/301
4	Magnetic core	Stainless steel 1.4105/430F
5	Core guide tube	Stainless steel 1.4303/305/308
6	Seal	FKM
7	Armature seal	FKM
8	Valve body	Brass
9	Sub-base	Steel, surface finish thick-film passivated (brass variant)
10	Cover	Polyamide
11	Coil	PA (polyamide) / Epoxy
12	Nut	Steel, surface finish thick-film passivated (brass variant)

Dimensions

Port connection	A [inch]	B [mm]	C [mm]	D [mm]	G [mm]
Thread	G 1/4	46	26.8	49	12

Performance Specifications

Power consumption (Circuit function A):

Orifice [mm]	Power consumption	Electrical power Inrush AC [VA]	Electrical power Hold AC [VA]	Coil size	Switching times Opening [ms]	Switching times Closing [ms]
4.0	8 W AC or 8 W DC	24	17	5 (32 mm)	20	30
4.0	10 W AC or 10 W DC	30	22	6 (40 mm)	20	30

(The values correspond to a coil temperature of +20 °C.)

Product Installation

Installation Notes

• Ensure the environment conditions do not exceed the ratings.
• The valve must be accessible for physical inspection.
• It is recommended to use 1/2 inch stainless steel or PVC pipes for the inlet and outlet pneumatic connections.
• The length of the tubing between the valve and control devices should be as short as possible and free of kinks.