The Burkert Type 8652 AirLINE valve island has been especially developed for process automation requirements. New diagnostic functions can be visualised on the LC display, both in clear text as well as symbols. This makes it easy to relate to the shown messages and helps to save time during start-up and maintenance. Furthermore, the diagnostic message is also available at the controller, enabling a fast overview of the plant status.

The hardware is optimised for installation at the bottom of the control cabinet. Installation on a standard rail is also possible. Key pneumatic functions ensure increased process reliability, such as check valves in the exhaust air ducts that make sure there is no unplanned actuation due to pressure peaks.

General Technical Data

Product Properties	Description
Body Material	PA (polyamide)
Seal Material	NBR and PUR
Width per station	11 mm
Manual override	Latching, spring return (optional: lockable)
Number of valve slots	Max. 24
Maximum number of valve functions	Max. 48
Pneumatic intermediate supply	Optional for the variants with 16, 20 and 24 valve slots
Pressure range	Vac...10 bar
External supply air	3...10 bar
Flow rate QNn value air	310 l/min (measured at +20 °C, 6 bar pressure at valve inlet and 1 bar differential pressure)
Operating voltage	24 V DC (±10% tolerance)
Nominal power of each valve	0.7 W (0.175 W after power reduction)
Nominal current of each valve	29 mA (10 mA after power reduction)
Digital input	Max. 48
Operating medium	Oil-free or lubricated compressed dry air, neutral gases (5 μm filter recommended)
Degree of protection	IP20, IP65 in closed control cabinets
Ambient temperature	-10 °C...+55 °C

AirLINE Quick

AirLINE Quick considerably reduces the use of components in the control cabinet. With the AirLINE Quick Adapter, the valve terminal is adapted directly to the control cabinet floor or control cabinet wall.

Advantages:

• Reduced space requirement in the control cabinet
• Makes it possible to use more compact control cabinets
• Reduced installation effort due to hose connections directly at the bottom of the control cabinet

Circuit Functions

Standard Functions

• Circuit function C (CF C): 3/2-way solenoid valve, servo-controlled, with manual override, normally closed.
• Circuit function D (CF D): 2 × 3/2-way solenoid valve, servo-controlled, with manual override, normally open.
• Circuit function H (CF H): 5/2-way solenoid valve, servo-controlled, with manual override. Pressure applied via port (1), therefore one of the two ports (2) or (4) is under pressure.
• Circuit function L (CF L): 5/3-way solenoid valve, with manual override. In middle position all ports locked.
• Circuit function M (CF M): 5/3-way solenoid valve, servo-controlled, with manual override. In middle position ports 2 and 4 ventilated.
• Circuit function N (CF N): 5/3-way solenoid valve, with manual override. In middle position ports 2 and 4 exhausted.
• Circuit function Z (CF Z): 5/2-way solenoid valve. Impulse variant with 2 coils and manual override.

SIA Variant (for safety-related shut-off)

• Circuit function C (CF C): 3/2-way solenoid valve, servo-controlled, normally closed.
• Circuit function H (CF H): 5/2-way solenoid valve, servo-controlled.
• Circuit function L (CF L): 5/3-way solenoid valve, servo-controlled. In middle position all ports locked.

Approvals and Conformities

• Explosion protection: As a category 3 device suitable for zone 2/22. ATEX: II 3G Ex ec IIC Gc / II 3D Ex tc IIIC Dc. IECEx: Ex ec IIC Gc / Ex tc IIIC Dc.
• North America (USA/Canada): UL Listed (UL 61010-1). Optional UL Recognized for Hazardous Locations (Class I, Zone 2; Class II, Zone 22; Class I, Division 2).
• China Compulsory Certification (CCC): Products with Ex approval are suitable for import and use for hazardous applications in China.

Safety Instructions for Potentially Explosive Areas

• Do not connect or disconnect terminals (24 V supply, SIA, EVS, digital inputs) while energized in an explosive atmosphere.
• The Hot Swap function is prohibited in an active explosive atmosphere.
• Clean the device surface only with a damp or anti-static cloth to prevent electrostatic discharge.

Dimensions

Variant 4-, 8- and 12-fold

Variant	A	B	C	m	n
4-fold	66	-	4 x M5	3	1
8-fold	35	111	8 x M5	7	2
12-fold	77	154	10 x M5	11	3

Variant 16-, 20- and 24-fold

Variant	A	B	C	D	m	m'	n
16-fold with intermediate supply	112	224	10 x M5	114.3	7	7	4
20-fold with intermediate supply	134	268	10 x M5	158.3	11	7	5
24-fold with intermediate supply	156	312	10 x M5	158.3	11	11	6

Product Installation

To use the Hot Swap function, always observe a minimum distance to the front edge of the control cabinet when installing the valve island inside the control cabinet.

Product Design and Assembly

Electronic Module with Digital Inputs (Optional)

The digital inputs are supplied (24 V) by the electronic module. Current is limited to maximum 30 mA per digital input. Standard 3-wire sensors and 2-wire sensors with voltages between 10…30 V as well as mechanical limit switches can be used.

Valves Type 6534 for Safety-Related Shut-off, SIA Variant (Optional)

Type 6534 valves are equipped with additional connection terminals. A valve circuit can therefore be interrupted by an external switch. Manual override is not required for these valve variants. To use the shut-off function, connect the terminal to a potential-free contact (mechanical switch or relay).

Example Configuration

The following illustration shows a network with the example of AirLINE Type 8652 with Industrial Ethernet variant as master valve terminal and various AirLINE Type 8652 with büS variant as slave valve terminals.

Ordering Chart Replacement Valves

Solenoid valve Type 6534

Circuit function	Nominal diameter	QNn value Air	Pressure range	Voltage	Article no.
C (CF C) 3/2-way, NC	4 mm	270 l/min	Vac...10 bar	24 V DC	20102334
D (CF D) 2 × 3/2-way, NO	4 mm	310 l/min	Vac...10 bar	24 V DC	301375
H (CF H) 5/2-way	4 mm	290 l/min	Vac...10 bar	24 V DC	301376
L (CF L) 5/3-way, all ports locked	4 mm	275 l/min	Vac...10 bar	24 V DC	301380

Solenoid valve Type 6534 SIA variant (2nd port for shutdown)

Circuit function	Nominal diameter	QNn value Air	Pressure range	Voltage	Article no.
C (CF C) 3/2-way, NC	4 mm	270 l/min	Vac...10 bar	24 V DC	20102335
H (CF H) 5/2-way	4 mm	290 l/min	Vac...10 bar	24 V DC	338805
L (CF L) 5/3-way, all ports locked	4 mm	275 l/min	Vac...10 bar	24 V DC	346830