Burkert Type 8647 AirLINE SP is a modular, electropneumatic automation system consisting of connection and valve modules. It has been especially developed for safe and complete integration into the decentralised peripheral system SIMATIC ET 200SP and SIMATIC ET 200SP HA from Siemens. Pneumatically operated process valves, pneumatic cylinders, or other pneumatic components can be connected to the pneumatic outputs. If the pneumatic components are installed with position feedbacks, the position of the actuated pneumatic components can be displayed on the associated pilot valve.

• Direct connection to the I/O systems SIMATIC ET 200SP and SIMATIC ET 200SP HA
• Integration in Siemens PCS7 possible
• Siemens Product Partner for SIMATIC Automation Systems
• Easy diagnostics by LC display
• Safety-related shut-off of valves possible

General Technical Data

Note

The general technical data refer to the pilot valves Type 0460, 6524, and 6525.

Product properties	Type 0460, Type 6524, Type 6525
Body material	PA (polyamide), PC (polycarbonate) (valves: PA, PPS, or aluminum)
Seal material	NBR (valves: FPM, NBR, and PUR)
Width per station	11 mm
Manual override	Standard
Number of valve slots	For single valves: max. 64. For impulse and double valves: max. 32
Maximum valve functions	64 on one valve block, several valve blocks possible on one station
Pressure range	Vac to 10 bar (with UL approval Vac to 8 bar)
Flow rate QNn value air	200 to 300 l/min measured at + 20 °C, 6 bar pressure at valve inlet and 1 bar differential pressure
Operating voltage	24 V DC (±10 % voltage tolerance)
Nominal power of each valve	For single valves: 0.8 W. For impulse and double valves: 2× 0.8 W with power reduction
Operating medium	Oil-free or lubricated compressed dry air (5 μm filter recommended)
Degree of protection	IP20, IP65 in closed control cabinets
Working port	D 6, D 1/4, ALQ
Air supply connection	G 1/4, D 3/8
Communication module	Siemens SIMATIC ET 200SP / SP HA

Solenoid Valves Type 6524 and Type 6525

The pilot valve Type 6524 (single and double valve) and Type 6525 (single valve) consist of a pilot flipper solenoid valve Type 6144 and a pneumatic seat valve. The circuit function allows switching of high pressures with low power consumption and short switching times. The pilot valves are equipped with a manual override as standard.

Solenoid Valves Type 0460

The solenoid valve Type 0460 consists of a pneumatic valve body fitted with a double coil pilot valve. The principle allows switching of high pressures together with low power consumption and fast switching times. All valves are equipped with manual override as a standard.

AirLINE Quick

AirLINE Quick considerably reduces the use of components in the control cabinet. With the AirLINE Quick Adapter, the valve terminal is adapted directly to the control cabinet floor or control cabinet wall. This makes it possible to use more compact control cabinets and reduces installation effort due to hose connections directly at the bottom of the control cabinet.

Note

The valves of Type 0460 cannot be installed with AirLINE Quick due to their size.

Circuit Functions

Circuit function	Description
C (CF C)	3/2-way solenoid valve. Servo-controlled, with manual override. Normally closed.
C (CF C)	2 × 3/2-way solenoid valve. Servo-controlled, with manual override. Normally closed.
D (CF D)	3/2-way solenoid valve. Servo-controlled, with manual override. Normally open.
H (CF H)	5/2-way solenoid valve. Servo-controlled, with manual override. Pressure applied via port (1), therefore one of the two ports (2) or (4) is under pressure.
L (CF L)	5/3-way solenoid valve. With manual override. In middle position all ports locked.
N (CF N)	5/3-way solenoid valve. With manual override. In middle position ports 2 and 4 exhausted.
Z (CF Z)	5/2-way solenoid valve. Impulse variant with 2 coils and manual override. Pressure applied via port (1), therefore one of the two ports (2) or (4) is under pressure.

Approvals and Conformities

• Explosion protection: Optional: Explosion protection as a category 3 device suitable for zone 2. ATEX: BVS 18 ATEX E 078 XII 3G Ex ec IIC T4 Gc. IECEx: IEC Ex BVS 18.0068 X Ex ec IIC T4 Gc.
• North America (USA/Canada): Optional: UL Listed for the USA and Canada according to UL 61010-1 and CAN/CSA-C22.2 No. 61010-1.

Installation Notes

Safety Warning

The electrical shutdown of valve Types 6524 and 6525 causes them to return to the rest position. The selection of the appropriate circuit function of the valve (CFC, CFD or CFH) depends on the application and is the responsibility of the user. To avoid brief back pressures in the event of a safety shutdown, the use of valve blocks with integrated check valves is strongly recommended.

• External-Valve-Shut-off function (EVS function): The switching contact must be located in the same control cabinet as the valve block. The line length must be limited to a maximum of 2 m.
• Hot Swap: The Hot Swap function of the individual valves cannot be combined with the ATEX/IECEx-Ex approval.
• SIMATIC ET 200SP HA: A SIMATIC ET 200SP BaseUnit is required directly to the left of the valve block for the load voltage supply.