TLV Y3 Y-shaped stainless steel strainer for water, steam and other fluids protects equipment from dirt, rust or scale in the pipeline. It features a simple yet rugged construction ensuring long service life, a double-layer stainless steel screen with a large surface area for trouble-free operation, and is designed for easy inline cleaning and maintenance.

Specifications

WARNING

To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range. Local regulations may restrict the use of this product to below the conditions quoted.

Model	Y3
Connection	Screwed
Size	1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
Maximum Operating Pressure PMO	21 barg
Maximum Operating Temperature TMO	220 °C
Standard Screen Mesh Size	60

PRESSURE SHELL DESIGN CONDITIONS (NOT OPERATING CONDITIONS): Maximum Allowable Pressure (barg) PMA: 21 Maximum Allowable Temperature (˚C) TMA: 220

Configuration

No.	Description	Material*	DIN	ASTM/AISI
1	Body	Cast Stainless Steel SCS13A	1.4312	A351 Gr. CF8
2	Screen Holder	Cast Stainless Steel SCS13	1.4308	A351 Gr. CF8
3	Screen inside/outside	Stainless Steel SUS304	1.4301	AISI304
4	Screen Holder Gasket	Fluorine Resin PTFE	PTFE	PTFE

* Equivalent materials

Dimensions

Y3 Screwed*

Size	L	H	$H_1$	Weight (kg)
$1/2''$	78	66	51	0.3
$3/4''$	93	78	61	0.4
$1''$	108	92	71	0.6
$1\frac{1}{4}''$	128	108	82	1.0
$1\frac{1}{2}''$	143	122	93	1.2
$2''$	173	154	119	2.1

(mm) * BSP, DIN 2999, other standards available

Installation & Maintenance

WARNING

• Install properly and DO NOT use this product outside the recommended operating pressure, temperature and other specification ranges.
• Take measures to prevent people from coming into direct contact with product outlets.
• When disassembling or removing the product, wait until the internal pressure equals atmospheric pressure and the surface of the product has cooled to room temperature.
• NEVER attempt to modify the product in any way.
• Do not use excessive force when connecting threaded pipes to the product.
• Use only under conditions in which no freeze-up will occur.
• Use only under conditions in which no water hammer will occur.

INFO

• Before installing the product, blow out the piping to remove any piping scraps, dirt, oil and scale.
• Do not remove the product from its box or protective covering until just prior to installation. Remove any plugs or seals just prior to installation.
• Do not use a wire-brush or other hard devices to clean the screen.