Skip to content
ISA 100.11AIntrinsically SafeIP66/IP672.4 GHz

TLV iT5-IS-SUN Wireless Surface Temperature and Ultrasonic Sensor

The TLV iT5-IS-SUN iTrapSensor is an intrinsically safe wireless sensor for high-frequency monitoring of surface temperature and ultrasound in steam equipment, featuring ISA 100.11A protocol and up to 400°C measurement.

TLV iT5-IS-SUN Wireless Surface Temperature and Ultrasonic Sensor

The TLV iT5-IS-SUN iTrapSensor is a monitoring sensor with wireless communication designed for high-frequency monitoring of crucial steam-using equipment such as heat exchangers, presses, turbines, equipment in difficult-to-reach locations, or steam traps. Based on the ISA 100.11A protocol, it provides reliable wireless surface temperature and ultrasonic measurement.

TLV iT5-IS-SUN product image

Features

  • High frequency monitoring: measurement cycles configurable between 1 second and 1 hour.
  • Line-of-sight communication distance of 400 m between sensor and repeater or between repeaters.
  • Powered by a long-life battery pack, replaceable in hazardous locations.
  • Surface temperature measurement up to 400 °C.
  • Intrinsically safe construction for use in hazardous and nonhazardous locations.
  • Optional extended antenna type for remote antenna mounting.

INFO

Steam trap diagnostic software is required separately. Contact TLV for details.

Specifications

ModeliT5-IS-SUN
TypeLow TemperatureHigh Temperature
Maximum Measurement Temperature (°C)250400
Measurable Temperature Range (°C)-40 to +250-40 to +400
Minimum Ambient Temperature (°C)-40
Maximum Ambient Temperature (°C)Maximum Measurement Temperature-40 to < 13580 (vertical), 80 (parallel)80 (vertical), 80 (parallel)
135 to < 20075 (vertical), 77 (parallel)75 (vertical), 77 (parallel)
200 to < 25067 (vertical), 75 (parallel)
200 to < 30067 (vertical), 75 (parallel)
300 to < 40062 (vertical), 72 (parallel)
Wireless Frequency Band2.4 GHz
Maximum No. of Connections500 devices per gateway 1)
Maximum No. of Hops4 (from access point to sensor)
Measurement Cycle 2)1 second to 1 hour
Power SourceTypeNon-rechargeable lithium-thionyl chloride battery pack 3)
Rated Voltage3.6 V
Rated Capacity38 Ah
Battery Life 4)10 years for regular operation (60 s measurement cycle), or 5 years (15 s measurement cycle)
Intrinsic Safety SpecificationsATEX: II 1G Ex ia IIC T4 Ga
UL/cUL: Class I, Division 1, Groups ABCD
IECEx: Ex ia IIC T4 Ga, Class I, Zone 0, AEx ia op is IIC T4, Ex ia op is IIC T4
UKEX: Ex ia IIC T4 Ga
Connecting PipeStraight pipe
Wireless ModuleCommunication ProtocolISA 100.11a, based on IEEE 802.15.4
Regulatory ComplianceFCC, IC, CE compliant
Frequency Bandwidth2.405 to 2.480 GHz
Transmitter Power Output7.0 mW/MHz
Communication DistanceApprox. 400 m 5) (with a clear line of sight)
Protection ClassIP66 and IP67 (evaluation for intrinsic safety is performed at IP20)
MaterialBody, CoverAluminium Alloy Die Castings (ADC3, SG100A)
Sensor TipStainless Steel (SUS304)
Heat Shield PlatePolyetheretherketone (PEEK)
OptionsExtended antenna type: Sensor with 150 mm antenna and 3 m or 13 m cable (intrinsically safe)
Sensor mounting method: Clamp or band type

1) When using TLV-recommended system (Yokogawa Electric Corporation: YFGW410)
2) Measurement cycle can be configured per sensor. Configurable cycle varies depending on gateway used.
3) Battery pack can be replaced in hazardous locations
4) Battery life is given for an ambient temperature of 25 °C and may vary depending on environmental conditions such as gateway used, transmission status and ambient temperature.
5) Depends on environmental conditions and installation location.

Dimensions

TLV iT5-IS-SUN dimensions

Options

TLV iT5-IS-SUN extended antenna option

System Configuration Example

TLV iT5-IS-SUN system configuration example

No.ModelFunction
1Sensor: iT5-IS-SUNMeasurement of ultrasound and surface temperature, wireless transmission of information
2Repeater: iT5-IS-RUNWireless relay of information
3Access Point/GatewayRelay of information via intranet
4Data Collection ServerImporting collected data

Refer to individual specification data sheets (SDS) for full details.